Chalkboard paint on canvas. It's nice. When I get tired of the quote, I can change it.
Monday, January 28, 2013
Dining Room Dressing
Remember way back in July when I finished painting this room? It has been sitting un-dressed for several months now. The dining room serves mostly as my craft room. We don't really eat in there, so I can leave all of my projects in their various states for days/weeks. The room was really starting to get me down. The walls were getting more and more "meh." My bro's lady said that she still likes it and thinks it just needs some accessorizing. Window dressings are a start. I want a buffet, but I have to find one that I can refinish for cheap. I have no desire to spend $500+ on a sideboard. Curtains and wall art will suffice for now.
Chalkboard paint on canvas. It's nice. When I get tired of the quote, I can change it.
Chalkboard paint on canvas. It's nice. When I get tired of the quote, I can change it.
Sunday, January 27, 2013
On the Rails
Anyone who has been over to our house has noticed what we affectionately call "The Cliff." It's the four foot drop from the kitchen to the den. When we moved in there was a rail there, but we removed it to put in the new fridge. The rail was in TERRIBLE shape. I'm not even sure we needed tools to take it down.
I finally got around to putting in a new rail. I'm am quite pleased with the results.
"The Cliff" Before
Remnants of the old railing. It's not even installed on a level surface. It's also painted orangeish.
The first thing I had to do was set the newel post. There were two options for setting it to the floor. One involved a 12" spike that is supposed to attach to the supports underneath. Because of the strange outcropping and bumped up floor this wasn't going to work. Instead I bracketed the post to the floor and used a special molding to cover up the hardware.
Then I set all of the balusters into the floor using dowel screws. I measured, drilled, and then twisted them into the floor.
By far the most difficult part involved the half-newel, the one that attaches to the wall. Because the post had to be attached to the rail as well as the wall we had some finagling to do. While I did most of this project myself, I needed Jeremy for this part. To bolt the rail to the post Jeremy held the rail with a death grip and I used the socket wrench to screw it on. After wrestling with it for a while we finally got it attached. Then I was able to attach the post to the wall, which was FAR easier. After that setting the rail in place and bolting it to the freestanding newel went fast.
Check out the finished product!
Also, Mama's new socket set...
I finally got around to putting in a new rail. I'm am quite pleased with the results.
"The Cliff" Before
Remnants of the old railing. It's not even installed on a level surface. It's also painted orangeish.
The first thing I had to do was set the newel post. There were two options for setting it to the floor. One involved a 12" spike that is supposed to attach to the supports underneath. Because of the strange outcropping and bumped up floor this wasn't going to work. Instead I bracketed the post to the floor and used a special molding to cover up the hardware.
Then I set all of the balusters into the floor using dowel screws. I measured, drilled, and then twisted them into the floor.
By far the most difficult part involved the half-newel, the one that attaches to the wall. Because the post had to be attached to the rail as well as the wall we had some finagling to do. While I did most of this project myself, I needed Jeremy for this part. To bolt the rail to the post Jeremy held the rail with a death grip and I used the socket wrench to screw it on. After wrestling with it for a while we finally got it attached. Then I was able to attach the post to the wall, which was FAR easier. After that setting the rail in place and bolting it to the freestanding newel went fast.
Check out the finished product!
Also, Mama's new socket set...
Saturday, January 5, 2013
Organization
I made a list today of all the projects I want done in hopes that I'd find something to get working on. All of them seemed like big undertakings, so I started small instead--especially since I wasn't getting any help from my housemates
I cleaned up my "craft closet" so I could actually walk into it. It's not actually all craft stuff, but "craft and other stuff closet" isn't as alliterative.
Before:
After:
While it's no Ikea closet, at least I touch the back wall now and access all of my stuff without frustration. Hopefully you'll be seeing some more posting on here as the winter progresses. I'm getting a little stir crazy already...
I cleaned up my "craft closet" so I could actually walk into it. It's not actually all craft stuff, but "craft and other stuff closet" isn't as alliterative.
Before:
After:
While it's no Ikea closet, at least I touch the back wall now and access all of my stuff without frustration. Hopefully you'll be seeing some more posting on here as the winter progresses. I'm getting a little stir crazy already...
Sunday, December 30, 2012
Dresser Remake
Anyway, here's the finished dresser from the summer. I finally got around to making the knobs. I used a cool technique I saw on pinterest--with the sharpie and the baking, etc... The knobs are what held me up on this post. I made some horribly ugly ones first that only served to collect immense amounts of dust.
Before:
After:
While I would've like to preserve the wood color of the dresser (which would have looked fantastic with the turquoise, by the way) the veneer was thin and too badly scratched for repair. I either would have had to purchase and apply new veneer, which is not a project I'm ready for, or settle for paint. Thankfully I think the painting turned out nicely.
Sunday, November 25, 2012
Picture Space
Hey readers. I'm working on a picture problem right now. Apparently I've used up 1 GB worth of picture google space. I'm working out what I want to do. I doubt it will involve paying for more space... I have an update to make, so hopefully I'll get it fixed soon!
Saturday, September 1, 2012
Hey Mister Postman
Curb appeal is important, right? I feel like my house looks like a ski chalet from the outside, since it's brown and has those off-red shutters.
You may remember my giant mailbox from an earlier post... I'll refresh your memory if not. It has a big brick base and a rusting mailbox with no door on top. The mailbox is encased in concrete. Nothing says classy like a mailbox without a front.
I set out to rectify that at the beginning of August. By rectify I mean I took the outer layer of concrete and peeled it off with my fingers when I went to get the mail. That made it look even worse because you could see all the mold that had collected in the cracks. Jeremy really loves when I start these projects with no direction.
I have been working on this for a week or so now. Step one was to remove the concrete and the rusting mailbox.
Husband did a great job because the sledge is too heavy for me to use effectively.
Action shot!
We decided to leave the base intact because it looks fine and is sturdier than a post. Also cheaper than buying a post and concrete....
We had a rain delay and couldn't finish the mailbox install over the weekend, so we put a pink dropcloth down (not pictured) and the old mailbox. We definitely were the coolest house on the block Monday during the workday...
After screwing the wood to the bottom of the new mailbox I stuck it to the brick with construction adhesive. Once the mailbox was installed I got to work on making it excellent.
I bought some cedar boards at Lowes. I picked cedar because it's naturally rot and insect resistant. It's the only type of wood that you don't have to stain/seal (excepted treated wood, of course). I measured the distance on both sides of the mailbox and came up with plans for flower boxes.
The long boards are 23.5 inches and the short are 5.5 inches.
I used wood screws to hold the boards in place. As you can see they're not 100% perfect, but they're fine as far as I'm concerned. The circular saw makes it difficult to make really straight cuts, so everything gets a bit off...
If I did this again I'd screw from the inside to hide the screwheads. I'll just say I'm going for a rustic look...
Then I drilled some holes in the bottom for drainage purposes and picked up some flowers.
*Sidenote: I picked mostly red flowers because they're less likely to attract bees. I don't want the poor mail lady to get stung. I also planted them towards the back of the box to for the same reason and to keep access to the flag. These flowers should last to the late fall, hopefully.
Once the plants were potted I adhered some shelf brackets behind the mailbox to secure the boxes to. The boxes will be screwed to the brackets, but not permanently attached. Then I can remove them for replanting/repairs if need be.
Here's the finished product!
You may remember my giant mailbox from an earlier post... I'll refresh your memory if not. It has a big brick base and a rusting mailbox with no door on top. The mailbox is encased in concrete. Nothing says classy like a mailbox without a front.
I set out to rectify that at the beginning of August. By rectify I mean I took the outer layer of concrete and peeled it off with my fingers when I went to get the mail. That made it look even worse because you could see all the mold that had collected in the cracks. Jeremy really loves when I start these projects with no direction.
I have been working on this for a week or so now. Step one was to remove the concrete and the rusting mailbox.
Husband did a great job because the sledge is too heavy for me to use effectively.
Action shot!
We decided to leave the base intact because it looks fine and is sturdier than a post. Also cheaper than buying a post and concrete....
We had a rain delay and couldn't finish the mailbox install over the weekend, so we put a pink dropcloth down (not pictured) and the old mailbox. We definitely were the coolest house on the block Monday during the workday...
After screwing the wood to the bottom of the new mailbox I stuck it to the brick with construction adhesive. Once the mailbox was installed I got to work on making it excellent.
I bought some cedar boards at Lowes. I picked cedar because it's naturally rot and insect resistant. It's the only type of wood that you don't have to stain/seal (excepted treated wood, of course). I measured the distance on both sides of the mailbox and came up with plans for flower boxes.
The long boards are 23.5 inches and the short are 5.5 inches.
I used wood screws to hold the boards in place. As you can see they're not 100% perfect, but they're fine as far as I'm concerned. The circular saw makes it difficult to make really straight cuts, so everything gets a bit off...
If I did this again I'd screw from the inside to hide the screwheads. I'll just say I'm going for a rustic look...
Then I drilled some holes in the bottom for drainage purposes and picked up some flowers.
*Sidenote: I picked mostly red flowers because they're less likely to attract bees. I don't want the poor mail lady to get stung. I also planted them towards the back of the box to for the same reason and to keep access to the flag. These flowers should last to the late fall, hopefully.
Once the plants were potted I adhered some shelf brackets behind the mailbox to secure the boxes to. The boxes will be screwed to the brackets, but not permanently attached. Then I can remove them for replanting/repairs if need be.
Here's the finished product!
Tuesday, August 21, 2012
Little Craft Projects
I've had some little craft projects here and there.
Frame Fix.
I have this adorable picture of my whole family from when I was little. When my parents moved they had an extra framed copy so I got it. The frame is pretty nice and so is the mat. I wanted to put it on my frame wall, but that means it has to have a black element to fit in nicely. However, because the mat has a gold accent I had to keep some of the gold on the frame.
I took the part I didn't want painted, taped it, and sprayed the rest black with a gloss coat. I was pleased with how it came out... except the stupid tape pulled off some of the shiny silver leaf. I did a little bit of patching with metallic acrylic paint, but admittedly did not put a whole-hearted/walleted effort into it.
Baby Card
Then I did a little hand-lettered card for my friend Ashlee's new little man.
Card:
Little Man:
Adorable!
Bulletin Board
I am back at school now so I am in the midst of setting up my room. I made some fancy accessories for my bulletin board.
Took some regular clipboards...
Painted some modge podge on the clipboards and quickly stuck on some pretty scrapbook paper.
What fancy office supplies! Just as pretty and so much cheaper than the ones at Target. $1.75 each vs. $4!
Frame Fix.
I have this adorable picture of my whole family from when I was little. When my parents moved they had an extra framed copy so I got it. The frame is pretty nice and so is the mat. I wanted to put it on my frame wall, but that means it has to have a black element to fit in nicely. However, because the mat has a gold accent I had to keep some of the gold on the frame.
I took the part I didn't want painted, taped it, and sprayed the rest black with a gloss coat. I was pleased with how it came out... except the stupid tape pulled off some of the shiny silver leaf. I did a little bit of patching with metallic acrylic paint, but admittedly did not put a whole-hearted/walleted effort into it.
Baby Card
Then I did a little hand-lettered card for my friend Ashlee's new little man.
Card:
Little Man:
Adorable!
Bulletin Board
I am back at school now so I am in the midst of setting up my room. I made some fancy accessories for my bulletin board.
Took some regular clipboards...
Subscribe to:
Posts (Atom)




